AMD BIOS Guide

Optimize your RAM performance and system stability by configuring memory overclocking settings in BIOS. This guide walks you through enabling XMP/EXPO/DOCP profiles and adjusting advanced DRAM timing parameters.

~8 min4 stepsKeyboard only (UEFI)

Proceed with caution.

Changing BIOS values can affect stability. Note your original settings before you begin, and test your system after applying changes.

Select your motherboard brand

Steps

ASUS

1
Load defaults & advanced
First, press load optimized defaults or F5. After that press F7 or Advanced mode.
This will restore BIOS to factory default values and switch to advanced view.
2
Tweaker
Click the AI Tweaker or Extreme Tweaker tab (normally the second tab from the left)
There you will click ai overclock tuner and select expo 1, docp, or xmp 1 (may vary for each ram kit).
3
DRAM timing control
Scroll down to DRAM timing control
Once you're inside, scroll down again until you find refresh interval. Type and set a value of 32767.
4
Save & exit
Save and exit
After that simply press F10 or Fn + 0 to save and exit BIOS.

Need help? Contact Support

Back to Guides

Select your motherboard brand

Steps

First, press load optimized defaults or F5. After that press F7 or Advanced mode.

Click the AI Tweaker or Extreme Tweaker tab (normally the second tab from the left)

Scroll down to DRAM timing control

Save and exit